Booting 'Xen (xen.gz) (2.6.11.11) LVM' kernel /xen.gz dom0_mem=140000 com1=115200,8n1 [Multiboot-elf, <0x100000:0x601ac:0x20e54>, shtab=0x181078, entry=0x100000] module /vmlinuz-2.6.11.11-xen0 root=/dev/ram0 lvm2root=/dev/vg1/root elevator=c fq ramdisk_size=10240 console=ttyS0 [Multiboot-module @ 0x182000, 0x3b95d0 bytes] module /initrd-lvm2.gz [Multiboot-module @ 0x53c000, 0x43e000 bytes] __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@linode.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) Tue Jun 7 15:09:36 EDT 2005 Latest ChangeSet: 2005/06/06 17:04:03 1.1686 42a473f3lFCz32vzD_NzxLZBkAfJ0A (XEN) WARNING: Only the first 4GB of the physical memory map can be accessed (XEN) by Xen in 32-bit mode. Truncating the memory map... (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009b800 (usable) (XEN) 000000000009b800 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bff70000 (usable) (XEN) 00000000bff70000 - 00000000bff78000 (ACPI data) (XEN) 00000000bff78000 - 00000000bff80000 (ACPI NVS) (XEN) 00000000bff80000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 00000000ffc00000 (reserved) (XEN) 00000000fffffc00 - 0000000100000000 (reserved) (XEN) System RAM: 3071MB (3144748kB) (XEN) Xen heap: 10MB (10652kB) (XEN) PAE enabled, limit: 16 GB (XEN) found SMP MP-table at 000f6290 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f62f0 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xbff740a9 (XEN) ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0xbff77e60 (XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xbff77ed4 (XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xbff77f88 (XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xbff77fb0 (XEN) ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x02000001) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) (XEN) Processor #6 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) (XEN) Processor #7 15:3 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47 (XEN) ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48]) (XEN) IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71 (XEN) ACPI: IOAPIC (id[0x05] address[0xfec82000] gsi_base[72]) (XEN) IOAPIC[3]: apic_id 5, version 32, address 0xfec82000, GSI 72-95 (XEN) ACPI: IOAPIC (id[0x08] address[0xfec82400] gsi_base[96]) (XEN) IOAPIC[4]: apic_id 8, version 32, address 0xfec82400, GSI 96-119 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 5 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 3000.242 MHz processor. (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 (XEN) Booting processor 2/6 eip 90000 (XEN) Initializing CPU#2 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 3 (XEN) CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 (XEN) Booting processor 3/7 eip 90000 (XEN) Initializing CPU#3 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 3 (XEN) CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Time init: (XEN) .... cpu_freq: 00000000:B2D41180 (XEN) .... scale: 00000001:554E44D2 (XEN) .... Wall Clock: 1118157076s 130000us (XEN) Brought up 4 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 08000000->10000000 (2232 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c0503784 (XEN) Init. ramdisk: c0504000->c0942000 (XEN) Phys-Mach map: c0942000->c09642e0 (XEN) Page tables: c0965000->c0970000 (XEN) Start info: c0970000->c0971000 (XEN) Boot stack: c0971000->c0972000 (XEN) TOTAL: c0000000->c0c00000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x43e000, start at 0xc0504000 (XEN) Scrubbing Free RAM: ...............................done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.11.11-xen0 (root@host44.linode.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #2 SMP Tue Jun 7 15:09:23 EDT 2005 BIOS-provided physical RAM map: Xen: 0000000000100000 - 00000000088b8000 (usable) 0MB HIGHMEM available. 136MB LOWMEM available. found SMP MP-table at 35777290 DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71 ACPI: IOAPIC (id[0x05] address[0xfec82000] gsi_base[72]) IOAPIC[3]: apic_id 5, version 32, address 0xfec82000, GSI 72-95 ACPI: IOAPIC (id[0x08] address[0xfec82400] gsi_base[96]) IOAPIC[4]: apic_id 8, version 32, address 0xfec82400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 5 I/O APICs Using ACPI (MADT) for SMP configuration information IRQ lockup detection disabled Allocating PCI resources starting at 08900000 (gap: 088b8000:f7748000) Built 1 zonelists Kernel command line: root=/dev/ram0 lvm2root=/dev/vg1/root elevator=cfq ramdisk_size=10240 console=ttyS0 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported: 3000.242 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: c9800000-f53fe000, maxmem 2d800000 Memory: 128288k/140000k available (2528k kernel code, 10516k reserved, 902k data, 332k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 per-CPU timeslice cutoff: 2925.02 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip c0100010 CPU #1 not responding - cannot use it. Booting processor 1/2 eip c0100010 CPU #2 not responding - cannot use it. Booting processor 1/3 eip c0100010 CPU #3 not responding - cannot use it. Total of 1 processors activated (5989.99 BogoMIPS). ENABLING IO-APIC IRQs Brought up 1 CPUs checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4344k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) xen_mem: Initialising balloon driver. SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. PCI: IRQ init TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) Grant table initialized IA-32 Microcode Update Driver: v1.14-xen Simple Boot Flag at 0x39 set to 0x1 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] hw_random hardware driver 1.0.0 loaded serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 54 (level, low) -> IRQ 54 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 55 (level, low) -> IRQ 55 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Xen virtual console successfully installed as ttyS0 Event-channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:pio hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 ata1: SATA max UDMA/133 cmd 0x14E8 ctl 0x14DE bmdma 0x14B0 irq 18 ata2: SATA max UDMA/133 cmd 0x14E0 ctl 0x14DA bmdma 0x14B8 irq 18 ata1: dev 0 ATA, max UDMA/133, 586114704 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 ATA, max UDMA/133, 586114704 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sda: drive cache: write back SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sdb: drive cache: write back /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice i2c /dev entries driver md: raid1 personality registered as nr 3 md: multipath personality registered as nr 7 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) ip_conntrack version 2.1 (1093 buckets, 8744 max) - 248 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered Ebtables v2.0 registered devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: adding sda4 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 4344KiB [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 332k freed initrd: Remounting / read/write initrd: Mounting /proc initrd: Finding device mapper major and minor numbers mknod: /dev/mapper/control: File exists (10,63) initrd: Activating LVM2 volumes 5 logical volume(s) in volume group "vg1" now active initrd: Mounting root filesystem /dev/vg1/root ro ReiserFS: dm-0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on dm-0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. initrd: Umounting /proc initrd: Changing roots initrd: Proceeding with boot... /bin/bash: blockdev: command not found INIT: version 2.85 booting Welcome to CentOS release 4.0 (Final) Press 'I' to enter interactive startup. Initializing hardware... storage network audio done[ OK ] Configuring kernel parameters: [ OK ] Setting clock (localtime): Tue Jun 7 15:11:32 EDT 2005 [ OK ] Setting hostname host44.linode.com: [ OK ] Checking root filesystem [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/vg1/root /dev/vg1/root: clean, 237961/3842720 files, 4124941/7680000 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Setting up Logical Volume Management: [ OK ] Starting up RAID devices: md0 Setting up Logical Volume Management: [ OK ] File descriptor 21 left open 5 logical volume(s) in volume group "vg1" now active Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 98/26104 files, 76962/104391 blocks [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: swapon: /dev/sda2: Invalid argument [FAILED] INIT: Entering runlevel: 3 Entering non-interactive startup Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting sshd: Failed update VA mapping: 15555000, 00000061, 00000000 kernel BUG at include/asm-xen/asm/hypercall.h:387 (HYPERVISOR_update_va_mapping)! [] mm_walk+0x221/0x261 [] mm_pin+0x4d/0x172 [] exec_mmap+0x15d/0x202 [] get_empty_filp+0x59/0xd7 [] flush_old_exec+0x18c/0x816 [] vfs_read+0xb9/0x129 [] kernel_read+0x4a/0x53 [] load_elf_binary+0x37e/0xc9b [] __alloc_pages+0x173/0x3df [] copy_strings+0x1bf/0x20d [] load_elf_binary+0x0/0xc9b [] search_binary_handler+0x7f/0x228 [] do_execve+0x185/0x206 [] sys_execve+0x3d/0x8a [] syscall_call+0x7/0xb Kernel panic - not syncing: BUG! smp_send_stop disable_local_APIC (XEN) Domain 0 shutdown: rebooting machine.